Cisco 7941G - Unified IP Phone VoIP User Manual

4-17
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
• Active—Cisco Unified Communications Manager server from which the
phone is currently receiving call-processing services.
• Standby—Cisco Unified Communications Manager server to which the
phone switches if the current server becomes unavailable.
• Blank—No current connection to this Cisco Unified Communications
Manager server.
An option may also display one of more of the following designations or options:
• SRST designation—Indicates a Survivable Remote Site Telephony router
capable of providing Cisco
Unified Communications Manager functionality
with a limited feature set. This router assumes control of call processing if all
other Cisco
Unified Communications Manager servers become unreachable.
The SRST Cisco
Unified Communications Manager always displays last in
the list of servers, even if it is active.
You configure an SRST router address in the Cisco Unified Communications
Manager SRST Reference Configuration window (choose System > SRST).
You configure an SRST reference in the Device Pool Configuration window
(choose System > Device Pool).
For more information, refer to Cisco Unified Communications Manager
Administration Guide.
• TFTP designation—Indicates that the phone was unable to register with a
Cisco
Unified Communications Manager listed in its configuration file, and
it registered with the TFTP server instead.
• Authentication icon—Displays as a shield and indicates that the
connection to the Cisco Unified Communications Manager is authenticated.
For more information about authentication, refer to Cisco Unified
Communications Manager Security Guide.
• Encrypted icon—Displays as a padlock and indicates that the
connection to the Cisco Unified Communications Manager is authenticated
and encrypted. For more information about authentication and encryption,
refer to Cisco Unified
Communications Manager Security Guide.
SIP Configuration Menu (SIP Phones Only)
The SIP Configuration menu contains these sub-menus:
• SIP General Configuration Menu, page 4-18

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English