Cisco 7941G - Unified IP Phone VoIP User Manual

4-35
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Wideband
Handset
Indicates whether wideband is enabled or disabled
for the handset.
Default: “Use Phone Default” on Cisco Unified
Communications Manager Administration. (This
default means that the phone will be enabled for a
wideband handset only if the phone was shipped
with a wideband handset.)
• If Wideband Handset UI
Control is enabled, you or
the user can choose
> User
Preferences >
Audio Preferences >
Wideband Handset.
• If Wideband Handset UI
Control is disabled, use
Cisco Unified
Communications
Manager Administration
and choose Device >
Phone > Phone
Configuration to set this
value.
Note If you allowed this
option to be user
controllable (in the
Wideband Handset UI
Control option), the
user-configured value
takes precedence.
Table 4-10 Media Configuration Menu Options (continued)
Option Description To Change

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English