Cisco 7941G - Unified IP Phone VoIP User Manual

CHAPTER
5-1
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.1
OL-14620-01
5
Configuring Features, Templates,
Services, and Users
After you install Cisco Unified IP Phones in your network, configure their
network settings, and add them to Cisco
Unified Communications Manager, you
must use Cisco
Unified Communications Manager Administration to configure
telephony features, optionally modify phone templates, set up services, and assign
users.
This chapter provides an overview of these configuration and setup procedures.
Cisco
Unified Communications Manager documentation provides detailed
instructions for these procedures.
For suggestions about how to provide users with information about features, and
what information to provide, see
Appendix A, “Providing Information to Users
Via a Website.”
For information about setting up phones in non-English environments, see
Appendix C, “Supporting International Users.”
This chapter includes the following topics:
• Telephony Features Available for the Cisco Unified IP Phone, page 5-2
• Configuring Corporate and Personal Directories, page 5-25
• Modifying Phone Button Templates, page 5-27
• Configuring Softkey Templates, page 5-28
• Setting Up Services, page 5-29
• Adding Users to Cisco Unified Communications Manager, page 5-30
• Managing the User Options Web Pages, page 5-30

Cisco 7941G - Unified IP Phone VoIP Specifications

General

Brand	Cisco
Model	7941G - Unified IP Phone VoIP
Category	IP Phone
Language	English