EasyManuals Logo
Home>Cisco>Switch>SF200-24

Cisco SF200-24 User Manual

Cisco SF200-24
314 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #208 background imageLoading...
Page #208 background image
Configuring Multicast Forwarding
Adding MAC Group Address
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 199
15
For viewing the forwarding information when the mode is IP Address Group or IP
and Source Group, use the
IP Multicast Group Address
page.
To define and view MAC Multicast groups:
STEP 1 Click Multicast > MAC Group Address. The
MAC Group Address
page
opens.
STEP 2 Enter the parameters.
• VLAN ID Equals To—Set the VLAN ID of the group to be displayed.
• MAC Group Address Equals To—Set the MAC address of the Multicast
group to be displayed. If no MAC Group Address is specified, the page
displays all the MAC Group Addresses from the selected VLAN.
STEP 3 Click Go, and the MAC Multicast group addresses are displayed in the lower
block.
Entries that were created both in this page and in the
IP Multicast Group Address
page are displayed. For those created in the
IP Multicast Group Address page
, the
IP addresses are converted to MAC addresses.
STEP 4 Click Add to add a static MAC Group Address. The
Add MAC Group Address
page opens.
STEP 5 Enter the parameters.
• VLAN ID—Defines the VLAN ID of the new Multicast group.
• MAC Group Address—Defines the MAC address of the new Multicast
group.
STEP 6 Click Apply, the MAC Multicast group is added, and the Running Configuration file
is updated.
To configure and display the registration for the interfaces within the group, select
an address, and click Details. The MAC Group Address Settings page opens.
The page displays:
• VLAN ID—The VLAN ID of the Multicast group.
• MAC Group Address—The MAC address of the group.
STEP 7 Select the port or LAG to be displayed from the Filter: Interface Type menu.
STEP 8 Click Go to display the port or LAG membership.
STEP 9 Select the way that each interface is associated with the Multicast group:

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SF200-24 and is the answer not in the manual?

Cisco SF200-24 Specifications

General IconGeneral
BrandCisco
ModelSF200-24
CategorySwitch
LanguageEnglish

Related product manuals