Managing System Files
Upgrade/Backup Firmware/Language
Cisco Small Business 200 1.1 Series Smart Switch Administration Guide 24
4
It includes the following topics:
• Upgrade/Backup Firmware/Language
• Downloading or Backing-up a Configuration or Log
• Displaying Configuration File Properties
• Copying Configuration Files
• Setting DHCP Auto Configuration
Upgrade/Backup Firmware/Language
The Upgrade/Backup Firmware/Language process can be used to:
• Upgrade or backup the firmware image
• Upgrade or backup the boot code
• Import a new language file, upgrade an existing language file, or remove a
second language file
The following methods for transferring files are supported:
• HTTP that uses the facilities provided by the browser
• TFTP that requires a TFTP server
If a new language file was loaded onto the switch, the new language can be
selected from the drop-down menu. (It is not necessary to reboot the switch.)
The
Upgrade/Backup Firmware/Language
page can also be accessed by
selecting Download New Language in the Language drop down menu on every
page.
A single firmware image is stored on the switch. After uploading a new firmware
image to the switch, that image is used. After new firmware has been successfully
loaded into the switch, the device needs to be rebooted prior to the new firmware
taking effect. The
Summary
page will continue to show the previous image prior to
the reboot.
Uploading a New Firmware or Language File
To Next Page
Loading...
Need help?
General
