Cisco Unified IP Phone 8941 User Manual

Search for the phone in Cisco Unified Communications Manager Administration by choosing Device
> Phone. Phones registered with Cisco Unified Communications Manager display the IP address on the
Find and List Phones window and at the top of the Phone Configuration window.
•
•
On the Cisco Unified IP Phone, press Applications, choose Administrator Settings > Network Setup,
and then scroll to the IP Address option.
Step 2
Open a web browser and enter one of the following URLs, where IP_address is the IP address of the Cisco
Unified IP Phone:
http://IP_address
or
https://IP_address
Device Information
The Device Information area on a phone web page displays device settings and related information for the
phone. The following table describes these items.
To display the Device Information area, access the web page for the phone, and then click the Device
Information hyperlink.
Table 22: Device Information Area Items
DescriptionItem
Media Access Control (MAC) address of the phoneMAC Address
Unique, fixed name that is automatically assigned to the phone based on its MAC
address
Host Name
Directory number assigned to the phonePhone DN
Identifier of the firmware running on the phoneApp Load ID
Identifier of the factory-installed load running on the phoneBoot Load ID
Revision value of the phone hardwareHardware Revision
Unique serial number of the phoneSerial Number
Model number of the phoneModel Number
Indicates if there is a voice message waiting on the primary line for this phone.Message Waiting
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
151
Cisco IP Phone Web Page

Cisco Unified IP Phone 8941 Specifications

General

Brand	Cisco
Model	Unified IP Phone 8941
Category	IP Phone
Language	English