Cisco Unified IP Phone 8941 User Manual

Related Topics
Determine DNS or Connectivity Issues, on page 183
Factory Reset of Phone Has Deleted 802.1X Shared Secret, on page 176
Reset the Phone to the Factory Settings from the Phone Keypad
You can reset the phone to the factory settings. The reset clears all the phone parameters.
Procedure
Step 1
Remove power from the phone in one of these ways:
•
Unplug the power adapter.
•
Unplug the LAN cable.
Step 2
Press the pound (#) key and plug the phone in.
Step 3
When the Headset and Speaker buttons are lit, enter the following key sequence:
123456789*0#
The phone resets.
Perform Factory Reset from Phone Menu
To perform a factory reset of a phone,
Procedure
Step 1
Press Applications.
Step 2
Choose Administrator Settings > Reset Settings > All.
If required, unlock the phone options.
Related Topics
Apply a Phone Password, on page 31
Perform Network Configuration Reset
Resets network configuration settings to their default values and resets the phone. This method causes DHCP
to reconfigure the IP address of the phone.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
188
Basic Reset

Cisco Unified IP Phone 8941 Specifications

General

Brand	Cisco
Model	Unified IP Phone 8941
Category	IP Phone
Language	English