Cisco XR 12000 Command Reference

Examples
The following example shows sample output from the show controllers plim asic egress-channel bay
command:
RP/0/0/CPU0:router# show controllers plim asic egress-channel bay 0 channel 0 location
0/4/CPU0
Host bay 0 Tx SPI4.2 channel 0 :
=============================================
Ifname : DATA_PORT_0
SPI4.2 Channel state : provisioned
Bay number : 0
Tx SPI4.2 channel number : 0
Internal Buffer number : 0
SPI4.2 calendar entries : 1
Buffer Almost Full Threshold : 0x2c00
Tx Queuing ASIC port number : 0
This table describes the significant fields shown in the display.
Table 2: show controllers plim asic egress-channel bay Field Descriptions
DescriptionField
Identifies the primary transmit interface.Ifname
Indicates if the SPI4.2
1
channel is provisioned.SPI4.2 Channel state
Identifies the bay that hosts the specified SPI4.2
transmit channel. Can be 0 or 1.
Bay number
Identifies the SPI4.2 channel whose information is
displayed.
Tx SPI4.2 channel number
Identifies the internal buffer associated with the
SPI4.2 transmit channel.
Internal Buffer number
Number of entries in the SPI4.2 calendar.SPI4.2 calendar entries
An increment counter which indicates that the
transmit buffer is almost full. The “Buffer Almost
Full Threshold” is expressed in hexadecimal format.
Buffer Almost Full Threshold
Identifies the SPI4.2 transmit port.Tx Queuing ASIC port number
1
System Packet Level Interface 4.2
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 4.3.x
OL-28456-02 3
ASIC Driver Commands
show controllers plim asic egress-channel bay

Cisco XR 12000 Specifications

General

Brand	Cisco
Model	XR 12000
Category	Network Router
Language	English