5.3.7 Removing and Installing the Hygienic Plug-In Gasket
For your safety when using the appliance
Before starting work, read and understand the rules, risks, and hazards specified in “
Safely Using the
Appliance
on page 97” and follow all the corresponding instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
Safely Opening and Closing the Appliance Door 60
Prerequisites
The combi steamer must have cooled down to a temperature of less than 140 °F since the last time
it was used.
The appliance door must be open.
Removing the hygienic plug-in gasket
1.
Pull out the hygienic plug-in gasket around the appliance
door opening. Start from the corners.
5 How to Clean the Combi Steamer
Operating Manual 107
To Next Page
Loading...
Need help?
General
