5.1.1 Cleaning Methods
Cleaning Methods
Cleaning Methods Description When to use
Oven cleaning without
cleaning agents
Is a fully automatic process in
which the temperature and
duration are controlled by the
software
The cooking compartment is
rinsed with water only (without
using any cleaning agents)
For cleaning very light soiling or
eliminating odors between
individual cooking sequences
After prolonged periods of
nonuse (to remove dust, for
example), provided the combi
steamer has been thoroughly
cleaned before this
Fully automatic oven
cleaning with
connected canisters
(ConvoClean for easy
Dial
or
ConvoClean+ for
easyTouch)
Is a fully automatic process in
which the temperature, duration,
use of cleaning agents, and
rinsing are controlled by the
software
Cleaning agents are dosed by
the software and automatically
conveyed from the connected
canisters into the cooking
compartment
With easyDial (ConvoClean):
One of eight preconfigured
cleaning profiles needs to be
selected (CL1 to CL4 and
CL1d to CL4d)
With easyTouch (ConvoClean+):
A cleaning level needs to be
selected (1 to 4)
A cleaning duration needs to
be selected (eco, regular,
express)
The steam disinfection and
cooking compartment drying
functions can also be
optionally selected
Daily cleaning after finishing all
cooking for the day
Before placing the combi steamer
into operation for the first time in
order to get rid of all cooking
compartment soiling and
impurities accumulated during
transit, setup, and installation
After performing maintenance on
the combi steamer in order to get
rid of all cooking compartment
soiling and impurities
Fully automatic oven
cleaning with single-
measure dispensing
(ConvoClean for easy
Dial
or
ConvoClean+ for
easyTouch)
Is a fully automatic process in
which the temperature, duration,
use of cleaning agents, and
rinsing are controlled by the
software
The software will prompt the
operator to apply cleaning agents
from single-measure dispensing
bottles into the cooking
compartment
With easyDial (ConvoClean):
One of eight preconfigured
cleaning profiles needs to be
selected (CL1 to CL4 and
CL1d to CL4d)
With easyTouch (ConvoClean+):
A cleaning level needs to be
selected (1 to 4)
A cleaning duration needs to
be selected (eco, regular,
express)
The steam disinfection and
cooking compartment drying
functions can also be
optionally selected
Daily cleaning after finishing all
cooking for the day
Before placing the combi steamer
into operation for the first time in
order to get rid of all cooking
compartment soiling and
impurities accumulated during
transit, setup, and installation
After performing maintenance on
the combi steamer in order to get
rid of all cooking compartment
soiling and impurities
5 How to Clean the Combi Steamer
Operating Manual 72