6.3.2 Replacing the hygienic plug-in gasket
For your safety when performing maintenance
Before starting any maintenance work, familiarize yourself with the rules, risks, and hazards specified
in “
Working Safely When Performing Maintenance
on page 123” and follow all the corresponding
instructions without exception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
Safely Opening and Closing the Appliance Door 60
Removing and Installing the Hygienic Plug-In Gasket 107
Spare parts included
As indicated in the spare parts list, the required spare part is:
One (1) hygienic plug-in gasket
Prerequisites
Check whether the following prerequisites are met:
The combi steamer must have cooled down to a temperature of less than 140 °F since the last time
it was used.
The appliance door must be open.
The new gasket has been inspected for damage and is not damaged.
Replacing the hygienic plug-in gasket
To remove the old hygienic plug-in gasket and install the new one, follow the steps described in
“
Removing and Installing the Hygienic Plug-In Gasket
on page 107.”
6 How to Perform Maintenance on the Combi Steamer
Operating Manual 124
To Next Page
Loading...
Need help?
General
