DIR-620 Wireless N300 Router with 3G/CDMA/LTE Support
and USB Port
User Manual
Configuring via Web-based Interface
3G/LTE Modem
This menu is designed to operate USB modems.
If the PIN code check for the SIM card inserted into your USB modem is not disabled, proceed to
the 3G/LTE modem / PIN section. On the opened page, enter the PIN code in the PIN code field
and click the Enter button
10
.
Figure 144. The page for checking the PIN code.
If the PIN code check for the SIM card inserted into your USB modem is disabled, an active WAN
connection will be automatically created on the Net / WAN page when connecting a USB modem
to the router
11
.
Some USB modems
12
have an IP address from the subnet which coincides with the router's local
subnet. In this case, the relevant notification will be displayed in the web-based interface. For
proper operation of a USB modem, proceed to the Net / LAN page and change the value of the IP
Address field (for example, specify the 192.168.2.1 value). Wait until the router is rebooted.
10 For GSM USB modems only. For LTE and CDMA USB modems, it is required to disable the PIN code check on the
identification card prior to connecting the USB modem to the router.
11 For LTE and GSM USB modems only.
12 For Huawei E3272, ZTE MF823, ZTE MF827 USB modems only.
Page 186 of 225
To Next Page
Loading...
Need help?
General
