D-Link Web Smart Switch DGS-1210-16 User Manual

Configuration D-Link Web Smart Switch User Manual
2
2
1
1
Figure 4.14 – Tools Menu > Firmware Backup and Upgrade
HTTP: Backup or upgrade the firmware to or from your local PC drive.
Click Backup to save the firmware to your disk.
Click Browse to browse your inventories for a saved firmware file.
Click Upgrade after selecting the firmware file you want to restore.
TFTP: Backup or upgrade the firmware to or from a remote TFTP server. Specify TFTP Server IP Address
with IPv4 address and TFTP File Name for the firmware file you want to save to or restore from.
Click Backup to save the firmware to the TFTP server.
Click Upgrade after selecting the firmware file you want to restore.
CAUTION: Do not disconnect the PC or remove
the power cord from the Switch until the upgrade
completes. The Switch may crash if the firmware
upgrade is incomplete.
Allow to select different language packages for the Switch. Two methods can be selected: HTTP or TFTP.
Language Management
Figure 4.15 – Tools Menu > Language Management
HTTP: Install the language pack from your local PC drive.
Click Browse to find the file in your PC.
Click Add after selecting the language pack you want to install.

D-Link Web Smart Switch DGS-1210-16 Specifications

General

Brand	D-Link
Model	Web Smart Switch DGS-1210-16
Category	Switch
Language	English