D-Link Web Smart Switch DGS-1210-16 User Manual

Configuration D-Link Web Smart Switch User Manual
2
2
4
4
Figure 4.18 – Device Information
It also offers an overall status of common software features:
RSTP: Click Settings to link to L2 Functions > Spanning Tree > STP Global Settings. Default is disabled.
Port Mirroring: Click Settings to link to L2 Functions > Port Mirroring. Default is disabled.
Storm Control: Click Settings to link to Security > Storm Control. Default is disabled.
DHCP Client: Click Settings to link to System > System Settings. Default is disabled.
Jumbo Frame: Click Settings to link to L2 Functions > Jumbo Frame. Default is disabled.
SNMP Status: Click Settings to link to SNMP > SNMP > SNMP Global Settings. Default is disabled.
802.1X Status: Click Settings to link to AAA > 802.1X > 802.1X Settings. Default is disabled.
Safeguard Engine: Click Settings to link to Security > Safeguard Engine. Default is enabled.
IGMP Snooping: Click Settings to link to L2 Functions > Multicast > IGMP Snooping. Default is disabled.
Power Saving: Click Settings to link to System > Power Saving. Default is enabled.
The System Setting allows the user to configure the IP address and the basic system information of the
Switch.
System > System Settings
Figure 4.19 – System > System Settings

D-Link Web Smart Switch DGS-1210-16 Specifications

General

Brand	D-Link
Model	Web Smart Switch DGS-1210-16
Category	Switch
Language	English