To Next Page

To Previous Page

32 Printer and Laminator Settings

Theprinterdrivercomparesprintingdataforeachtypeofinktodeterminewhetherthere

areanyoverlappingpixels.Priorityisgiventothe“Printin2panels”setting.

Priority of Data

• The MAC address data is always printed using the UV panel. The area can knock out other printing.

• Image files are processed in the order registered and shown in the File Information area. Newer data

replaces older data if it overlaps.

• Extracted text has higher priority than an image file and prints on top of any image.

• Page Split overrides extracted data and any image files.

Page Split

PageSplitinformstheprinterdriverthatyouplantouseamultipageinputdocument:onepage

forYMC(color),anotherpageforblack(K),and(ifyouuseUVink)anadditionalpageforaUV

panel,inthatorder.YoucanspecifyPageSplitforblack(K)printingand

forUVpanelprinting.

Thefollowingexampleshowsatwo‐pagedocumentwithYMCandKprintingononesideofthe

card,andPageSplit chosenforKprintingonthesamesideofthecard.

Printingdata

insidetheMAC

addressarea.

None Printinone

panel

Printintwo

panels

YMCInk Printinone

panel(Does

notprintusing

theYMCKink.)

Printintwo

panels

Printintwo

panels

KInk Printintwo

panels

Printintwo

panels

UVInk PrintstheMACaddressonly

PrintingData

SettingforNumberofRetransferFilmPanelsto

Use

1Panel Auto 2Panels

DataCard SR300 User Manual

Other manuals for DataCard SR300