DataCard SR300 User Manual

46 Printer and Laminator Settings
Property Tab
ThePropertytabdisplaysread‐onlyinformationfor:
 Theversionofprinterfirmware,andfirmwareversionsof
anyinstalledoptionssuchasalaminator.Noneor??
meansanoptionisnotinstalledorconnected.Forsmart
card,thetextshowswhatissupported,notwhatis
installed.
 Configurationinformationforoptionsinstalled.
 Counters:
 PrintCounter:Thenumberofcardsthathaveprinted
correctly.ThecountercanberesetonthePrinter
Statustab.
 CleaningCounter:Thenumberofcardsprintedsincethelastcleaningcard.
 ErrorCounter:Thenumberofcardsthatwer enotprintedcorrectly.Thecountercanbe
resetonthePrinterStatustab.
 PrinterTotalCounter:Thetotalnumberofcardsprinted.
 ThermalHeadCounter:Thetotalnumberofprintedsidesforthesamehead.This
countercannotbereset;however,itautomaticallyresetsitselfwhentheprintheadis
replaced.
YoucanselectwhichcounterdisplaysontheLCDpanelusingthePrinterSettingtab
(refertopage 42.)

DataCard SR300 Specifications

General

Brand	DataCard
Model	SR300
Category	Printer
Language	English