DataCard SR300 User Manual

SR200 & SR300 Card Printers and LM200 & LM300 Laminators User’s Guide 49
Security Lock Tab
TheSecurityLocktabdisplaysthecurrentstateofthe
password‐protectedelectroniclock:SecurityUnlockor
SecurityLock.
Activatethesecuritylocktoengagethelocksandprevent
accesstothesuppliesinsidetheprinterandthecardhopper.
Theprinterisshippedunlocked.
TipsforSuccess
 Writedownthepasswordandstoreitinasafeplace.
 TheStatusMonitorpasswordandthesecuritynumber
enteredontheprinterLCDpanelarenotlinked.Youcan
usedifferentvaluesfortheseitems.Referto“Usinga
PrinterSecurityKey”onpage 63.
Setting up Security
Youmustcreateapasswordbeforetheprintercanbelocked.
1. SelectNewPasswordtoenablethepassw or darea.
2. Enterthedesiredpasswordinbothareas.
Thepasswordcanbeuptoeightalphanumericcharacters.
3. ClickUpdate.
4. ClickOKtoenablethenewpassword.
Locking the Printer
Lockingtheprinteractivatesthesecuritylockandpreventsthedoorfrombeingopenedandthe
cardhopperfrombeingremoved.Theprintercanonlybelockedifapasswordhasbeensetup.
1. SelectSecurityLock.
2. ClickUpdate.
3. ClickOKtoactivatethesecuritylockthatprev entsthe
printer
doorfrombeingopened,andthecardhopper
frombeingremoved.
Warning:Donotforgetorlosethepassw ord.Ifthepasswordislost,theonlywa yto
deactivatethesecuritylockisbyreturningtheentireprintertoDatacardforfactory‐
repair.YourDatacardCustomerCareCentercannotretrieveorresetthepassword.

DataCard SR300 Specifications

General

Brand	DataCard
Model	SR300
Category	Printer
Language	English