Datalogic PowerScan PD953X User Manual

2D Global Features Enter/Exit Programming Mode
Product Reference Guide 181
China Sensible Code Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Con-
trol. Length 1 is the minimum label length if in Variable
Length Mode, or the
first fixed length if in Fixed Length Mode. Characters can be set from 0001
to 7,8
27 characters in increments of 0001 (pad with zeroes).
See page 281 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad repre-
senting your desired character(s). End by scanning
the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code t
o abort
and not save the entry string. You can then start
again at the beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character
China Sensible Code Set Length 2
This feature specifies one of the bar code lengths for China Sensible Code
Length Control. Length 2 is the maximum label length if in Variable Length
Mode, or the second fixed length if in
Fixed Length Mode. Characters can be
set from 0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See page 282 for detailed instructions on setting this feature.
$CCSL2
Select China Sensible Code Length 2 Setting
To configure this feature, scan the ENTER/EXIT
PROGRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
Appendix D, Keypad repre-
senting your desired character(s). End by scanning
the
ENTER/EXIT bar code again.
Make a mistake? Scan the CANCEL bar code t
o abort
and not save the entry string. You can then start
again at the beginning.
~
CANCEL
DEFAULT
Length 2 is 7,827 Characters

Datalogic PowerScan PD953X Specifications

General

Brand	Datalogic
Model	PowerScan PD953X
Category	Barcode Reader
Language	English