Enter/Exit Programming Mode
Product Reference Guide
77
Decode Negative Image
Enable/Disable the ability to decode a negative image for all symbologies.
When this feature is enabled, you will be unable to read normally-printed
labels or programming labels in this manual. Scan the “Disable” bar code
below to return the scanner to its default for this feature.
The reader can also be set to d
ecode both positive and negative codes for
certain 2D codes. See "2
D Normal/Inverse Symbol Control" on page 176 for
information on this feature.
For additional options, see the Ala
ddin configuration application.
CAUTION
Decode Negative Image = Disable
Decode Negative Image = Enable
When this feature is enabled, you will be unable to read other pro-
gramming labels in this manual.
Unlike some programming features
and options, Decode Negative
Image selections require that you scan only one programming bar
code label. DO NOT scan an ENTER/EXIT bar code prior to scanning a
Decode Negative Image bar code.
Image Capture
Image capature is supported by RS-232 and USB-COM interfaces only. For
information and a list of options for Image Capture, use the Datalogic Alad-
din configuration application, available for free download from the Data-
logic Scanning website.
To Next Page
Loading...
Need help?
General
