Enter/Exit Programming Mode
Product Reference Guide
235
STAR Radio Transmit Mode
Specifies the transmission protocol for Star communications.
Options are:
• ACK from cradle to scanner — signals a good
transmission as soon as
the Base Station receives a label
• ACK when sent to host — scanner signals
a good transmission as soon
as the Base Station has sent the label to the host
• ACK from host — scanner signals a go
od transmission as soon as the
Base Station has sent the label to the host and host has replied with an
acknowledge message.
DEFAULT
ACK from cradle
ACK when sent to host
ACK from host
The Base Station can receive a host message only if Host Com-
mands Obey/Ignore (page 23) is set to Ignore.
ACK from host works only for RS-232 or USB-COM interfaces with
A
CK/NACK disabled. If ACK from host is configured with any other
interface conditions, it works like ACK when sent to host. See
"Message Formatting"
on page 307 for details.
For this feature to be operational, the
scanner must be set to
Ignore Host Commands (see
page 23
).
To Next Page
Loading...
Need help?
General
