Technical Specifications
312
PowerScan™ PD953X/PBT950X/PM950X
Charge time for full
charge from full dis-
charge
4,5 hours with external power supply adapter
a
Typical 10 hours with Host power (in this case no supply
adapter is needed)
a
Operating autonomy
(continuous reading)
60,000 reads (typical, @25° C)
Cradle consumption and
DC
input supply range
Volt 10-30 VDC; Power <8W
b
;
Max 500 mA when in host/bus powered mode
b
.
Performance Characteristics
Light Source LED
Roll (Tilt) Tolerance ± 180°
Pitch Tolerance ± 40°
Skew (Yaw) Tolerance ± 40°
Print Contrast
Minimum
15% minimum reflectance
Standard Optics Model High Performance (HP)
Resolution
Max resolution 1D 4 mils
Max resolution 2D 7.5 mils
1D 2.5 mil
2D 4 mil
Depth of Field (Typical)
a
Symbology Standard Optics Model High Performance (HP)
Code 39
4 mils: 6-17 cm
20 mils: 4-55 cm
40 mils: 4-85 cm
2.5 mils: 2-6 cm
20 mils: 3-70 cm
40 mils: 3-110 cm
EAN 13 13 mils: 4-48 cm 13 mils: 3-60 cm
PDF-417 10 mils: 2-25 cm 10 mils: 2-30 cm
DataMatrix
7.5 mils: 7-14 cm
10 mils: 4-18 cm
4mil: 2-6 cm
10mil: 2-20 cm
Minimum
Element Width
Standard Range:
1D Minimum Resolution = 4 mil
PDF-417 Minimum Resolution
= 5
mil
Data Matrix Minimum Resolu-
tion = 7 mil
High Density:
1D Minimum Resolution = 2.5 mil
PDF-417 Minimum Resolution = 4 mil
Data Matrix Minimum Resolution = 5
mi
l
a
13 mils DOF based on EAN. All other 1D codes are Code 39. All labels grade A, 300 lux ambient light, 20°C,
label inclination 10°
a. Charge Times are much lower when battery is within daily typical operating condition.
b. Typical input current measured under factory default configuration.
Item Description
To Next Page
Loading...
Need help?
General
