Datalogic QuickScan i QD2100 User Manual

Label ID
Product Reference Guide 103
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of
hex 0x01-0xFF), used to identify a bar code (symbology) type. It can be appended pre-
vious to or following the transmitted bar code data depending upon how this option is
enabled. This feature provides options for configuring custom Label IDs as a pre-loaded
set (see
Label ID: Pre-loaded Sets on page 103) or individually per symbology (see La-
bel ID: Set Individually Per Symbology on page 106
). If you wish to program the read-
er to always include an industry standard label identifier for ALL symbology types, see
the previous feature Global AIM ID on page 100.
Label ID: Pre-loaded Sets
The imager supports two pre-loaded sets of Label IDs. Table 17 shows the USA set and
the EU set.
CAUTION
ENTER/EXIT PROGRAMMING MODE
DEFAULT
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
When changing from one Label ID set to another, all other imager con-
figuration settings, including the host interface type, will be erased
an
d set to the factory defaults. Any custom configuration or custom
defaults will be lost.

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g