Datalogic QuickScan i QD2100 User Manual

UPC-E
Product Reference Guide 127
UPC-E
The following options apply to the UPC-E symbology.
UPC-E Enable/Disable
When disabled, the reader will not read UPC-E bar codes.
ENTER/EXIT PROGRAMMING MODE
UPC-E = Disable
UPC-E = Enable
DEFAULT
UPC-E Check Character Transmission
Enable this option to transmit the check character along with UPC-E bar code data.
ENTER/EXIT PROGRAMMING MODE
UPC-E Check Character Transmission = Don’t Send
UPC-E Check Character Transmission = Send
DEFAULT

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g