Datalogic QuickScan i QD2100 User Manual

RS-232/USB-Com Interfaces
50 QuickScan
TM
QD2100
Beep On ASCII BEL
When this parameter is enabled, the reader issues a beep when a <BEL> character is de-
tected on the RS-232 serial line. <BEL> is issued to gain a user's attention to an illegal
entry or other important event.
ENTER/EXIT PROGRAMMING MODE
Beep On ASCII BEL = Disable
DEFAULT
Beep On ASCII BEL = Enable
Beep On Not on File
This option enables/disables the action of the reader to sound a three beep sequence upon
receiving a Not-On-File (NOF) host command.
ENTER/EXIT PROGRAMMING MODE
Beep On Not On File = Disable
DEFAULT
Beep On Not On File = Enable

Datalogic QuickScan i QD2100 Specifications

General

Scan speed	8 sec/page
Wavelength	610 nm
Tilt angle range	-65 - 65 °
Decoding standards	1D / GS1 DataBar China Post GS1 DataBar Expanded/ Stacked/ Stacked Omnidirectional
Dimensions (WxDxH)	170 x 66 x 71 mm
Standard interfaces	RS-232, USB, Keyboard wedge
Input voltage	5 V
Power consumption	340 mA
Product color	White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %

Weight and Dimensions

Weight	121.9 g