Dell Embedded Box PC5000 Service Manual

Before working inside your
Embedded Box PC
NOTE: The images in this document may dier from your Embedded Box PC
depending on the conguration you ordered.
Before you begin
1 Save and close all open les and exit all open applications.
2 Shut down the Embedded Box PC.
The shut-down instruction varies depending on the operating system installed on
the Embedded Box PC.
NOTE: For more information, see the documentation of your operating
system for shut-down instructions.
3 Disconnect the Embedded Box PC and all attached devices from their electrical
outlets.
4 Disconnect all cables such as network cables from the Embedded Box PC.
5 Disconnect all attached devices and peripherals, such as keyboard, mouse, and
monitor, from the Embedded Box PC.
6 After the Embedded Box PC is unplugged, press and hold the power button for 5
seconds to ground the system board.
Safety instructions
Use the following safety guidelines to protect your Embedded Box PC from potential
damage and ensure your personal safety.
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box PC. After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
11

Dell Embedded Box PC5000 Specifications

General

Brand	Dell
Model	Embedded Box PC5000
Category	Computer Hardware
Language	English