Dell Embedded Box PC5000 Service Manual

Replacing the power switch
WARNING: Before working inside your Embedded Box PC, read the safety
information that shipped with your Embedded Box PC and follow the steps
in Before working inside your Embedded Box PC. After working inside your
Embedded Box PC, follow the steps in After working inside your Embedded
Box PC. For more safety best practices, see the Regulatory Compliance
home page at www.dell.com/regulatory_compliance.
Procedure
1 Route the power switch and power-switch cable thought the slot on the top
cover.
2 Push the power switch in to the slot and snap the power switch in place.
Post-requisites
1 Replace the top cover.
2 Replace the power connectors.
3 Replace the riser card.
4 Replace the CANbus cable.
5 Replace the PCI/PCIe card (if necessary).
6 Follow step 2 to step 8 in “Replacing the back cover”.
115

Dell Embedded Box PC5000 Specifications

General

Brand	Dell
Model	Embedded Box PC5000
Category	Computer Hardware
Language	English