EasyManuals Logo

Dell PowerEdge R810 User Manual

Dell PowerEdge R810
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #182 background imageLoading...
Page #182 background image
182 Running the System Diagnostics
View status messages that inform you if tests are completed successfully
View error messages that inform you of problems encountered during
testing
When to Use the Embedded System Diagnostics
If a major component or device in the system does not operate properly,
component failure may be indicated. As long as the processor and the
system's input/output devices are functioning, you can use the embedded
system diagnostics to help identify the problem.
Running the Embedded System Diagnostics
The embedded system diagnostics program is run from the Life Cycle
Controller screen.
CAUTION: Use the embedded system diagnostics to test only your system. Using
this program with other systems may cause invalid results or error messages.
1
As the system boots, press <F10>.
2
Click
Diagnostics
in the left pane and click
Launch Diagnostics
in the
right pane.
The Diagnostics menu allows you to run all or specific diagnostics tests or to
exit.
System Diagnostics Testing Options
Click the testing option in the Main Menu window.
Testing Option Function
Express Test Performs a quick check of the system. This option runs
device tests that do not require user interaction.
Extended Test Performs a more thorough check of the system. This test
can take an hour or longer.
Custom Test Tests a particular device.
Information Displays test results.
book.book Page 182 Thursday, February 18, 2010 2:06 PM

Table of Contents

Other manuals for Dell PowerEdge R810

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dell PowerEdge R810 and is the answer not in the manual?

Dell PowerEdge R810 Specifications

General IconGeneral
Form Factor2U rack server
ChipsetIntel 7500 chipset
Memory Slots32 DIMM slots
ProcessorUp to four Intel Xeon 6500/7500 series processors
MemoryUp to 512GB (32 DIMM slots): 1GB/2GB/4GB/8GB/16GB DDR3
StorageUp to six 2.5" SAS or SATA drives
RAID ControllerPERC H700, PERC H800
NetworkFour embedded Broadcom NetXtreme II 5709c Gigabit Ethernet NICs
Power SupplyRedundant 1100W or 750W AC power supplies
Expansion Slots6 x PCIe Gen2 slots (3 x x8, 3 x x16)
Operating System SupportRed Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi

Related product manuals