9 Measurements and statistics
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
128
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. If the default information is displayed, press any button to open the main menu.
Otherwise, press the
EXIT
button repeatedly until the main menu is displayed.
Event Log
Energy Log
2. Use the and buttons to select the Event Log entry and then press the
ENT
button.
Grid Report
3. Use the and buttons to select the Grid Report entry and then press the
ENT
button.
→ The list of error events is displayed.
AC Volt Low
2. 22/02/2016 08:20
AC Freq High
1. 23/02/2016 17:20
4. Press and hold the , and
ENT
buttons simultaneously for at least 5 seconds.
→ A confirmation prompt is displayed.
Yes / No
Clear Event Logs?
5. Use the and buttons to select the Yes entry and then press the
ENT
button.
þ
The event log has now been deleted.
To Next Page
Loading...
Need help?
General
