23
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
5 Planning installation
5.3 Installation clearances and air circula-
tion
>30 cm >30 cm
> 80 cm
>30 cm
Fig. 5.1.: Installation clearances and air circulation I
► Ensure sufficient air circulation. Warm air must be able to
escape from below.
► Leave enough space around each inverter.
► Do not install inverters above one another so that they do not
heat each other.
► Note the Operating temperature range without derating and
the Operating temperature range.
When the Operating temperature range without derating is
exceeded the inverter reduces the AC power fed into the
grid.
When the Operating temperature range is exceeded the
inverter stops feeding AC power into the grid.
This is normal operating behavior for the inverter and is nec-
essary to protect the internal electronics.
To Next Page
Loading...
Need help?
General
