Delta RPI M50A Installation And Operation Manual

79
Installation and Operation Manual for Inverter RPI M50A_12s V1 EU EN 2017-03-09
8 Settings
8.3.2 Date and Time
Overview
This function allows you to set the date and time.
The date and time must be set correctly for exact
calculations of the statistics in the inverter or in a
monitoring system.
Setting options
Parameter Description Setting range
-
Date and Time –
Menu item path
Main menu > General settings > Date and time
Setting the date and time
E-Today: 0kWh
Power: 0W
Status: On Grid
10.Sep 2014 15:32
1. If the default information is displayed, press any button to open the main menu.
Otherwise, press the
EXIT
button repeatedly until the main menu is displayed.
Inverter Info.
General Settings
Install Settings
Active/Reactive Pwr
FRT
2. Use the and buttons to select the General Settings entry and then press the
ENT
button.
Protocoll
Baud rate
Date & Time
Language
3. Press the and buttons to select the entry Date and Time and then press the
ENT
button.
10.Sep 2014 14:55
4. Use the and buttons to change the currently selected (underlined) value and
then press the
ENT
button.
→ The selection jumps to the next value.

Delta RPI M50A Specifications

General

Brand	Delta
Model	RPI M50A
Category	Inverter
Language	English