Delta VFD9A0MS43ANSHA User Manual

Chapter 5 Main Circuit TerminalsMS300 (High Speed Model)
5-6
Frame B
Main circuit terminals:
R/L1, S/L2, T/L3, U/T1, V/T2, W/T3,
,DC-, DC+/+1, +2/B1, B2,
Note: 1-phase model with no T/L3 terminal
Models
Max. Wire
Gauge
Min. Wire
Gauge
Screw
Torque
(±10%)
VFD7A5MS23ANSHA
12 AWG
[3.3 mm
2
]
14 AWG
[2.1 mm
2
]
M4
15 kg-cm
[13.0 lb-in]
[1.47 Nm]
VFD7A5MS23ENSHA
VFD4A2MS43ANSHA
VFD4A2MS43ENSHA
VFD4A2MS43AFSHA
 If you install at Ta 45°C above environment, please select copper
wire which have voltage rating 600V and temperature resistant 90°C
or above.
 If you install at Ta 45°C environment, please select copper wire
which have voltage rating 600V and temperature resistant 75°C or
90°C.
 For UL installation compliant, you have to use copper wires when
installation, the wire gauge is based on temperature resistant 75°C
which is according to the requirements and recommendations from
UL. Do not reduce the wire gauge when using higher temperature
wire.

Delta VFD9A0MS43ANSHA Specifications

General

Brand	Delta
Model	VFD9A0MS43ANSHA
Category	Controller
Language	English