117
Operating DENON audio components
1
Press the mode selector buttons to select the component
you want to operate.
• The icon for the selected mode flashes.
This function switches as shown below each time one of
the AMP button is pressed.
: AMP, ZONE2, ZONE3, ZONE4 or
SYSTEM CALL
: TUNER
:DIGITAL TUNER (This mode is for future use.)
:SATELLITE or CABLE
:CDor CDR
: DVD or DVDR
: VCR or TAPE
:TV
Example:
Select “AMP” mode.
Select “ZONE2” mode.
Select “ZONE3” mode.
Select “SYSTEM CALL” mode.
Select “ZONE4” mode.
2
Operate the audio component.
For details, refer to the component’s operating
instructions.
It may not be possible to operate some models.
NOTES:
• When a remote control code is sent, the icon for the mode of the
device to which that code belongs flashes.
• The HOME button is used to return to the “AMP” mode when in
any mode other than “AMP” (“AMP”, “ZONE2”, “ZONE3”,
“ZONE4” or “SYSTEM CALL”).
To Next Page
Loading...
Need help?
General
