Denon AVC-A1XVA User Manual

92
6-6. Setting the Video Setup for ZONE2
[1] Video Convert Mode (ZONE2)
• Set whether or not to use the video conversion function for the signal output to the ZONE2 monitor output terminal.
Z2 Video Conv.
*Z2 Video Setup
1
Select “Video Setup” at the Zone Setup menu.
Z2 Video Setup
*Zone Setup
2
Display the Video Setup screen.
3
Select “Video Convert Mode”, then press the
ENTER button.
Display the Video Convert Mode.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
DVD : ON
*Z2 Video Conv.
4
q Select the ZONE2 input source. w Select the mode as below.
ON : When there are multiple input signals for the input sources selected at ZONE2, the input signal is detected and the input
signal output to the ZONE2’s monitor output terminal is selected automatically, in the following order of priority:
Component, S-Video, Composite.
OFF : The convert function does not operate.
The video signal of the input source selected at ZONE2 is only output to the ZONE2 video monitor output terminal.
The S-Video signal selected at ZONE2 is only output to the ZONE2 S-Video monitor output terminal.
ON OFF
The details in each mode are as follows.
(Main unit) (Remote control unit) (Main unit) (Remote control unit)

Denon AVC-A1XVA Specifications

General

Brand	Denon
Model	AVC-A1XVA
Category	Amplifier
Language	English