75
4-5. Setting the Audio Delay
• When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the
audio delay to delay the sound and synchronize it with the picture.
• The audio delay setting is stored separately for each input source.
1
Select “Audio Delay” at the Video Setup menu.
2
Display the Audio Delay screen.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
3
Set the delay time. (0 ms ~ 200 ms)
With a movie source, for example, adjust so that the movement of the actors’ lips is
synchronized with the sound.
(Main unit) (Remote control unit)
4
Enter the setting.
The Video Setup menu reappears.
(Main unit) (Remote control unit)
NOTE:
• The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode (only when
the crossover frequency is set to “FIXED–THX–” or front speaker is set to “Large”).
To Next Page
Loading...
Need help?
General
