Denon AVC-A1XVA User Manual

78
5-1. Setting the 2ch Direct/Stereo
• Set this when you want to change the speaker settings when the surround mode is set to the 2-channel Direct or Stereo mode.
1
Select “2ch Direct / Stereo” at the Advanced Playback
menu.
2
Display the 2ch Direct / Stereo screen.
Setting Basic
*2ch DRCT/ST
2ch DRCT/ST
*Advanced Play
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
Example: This screen is displayed in function of the settings made at “2-1. Speaker
Configuration”, “2-2. Subwoofer Setup”, “2-3. Delay Time” and “2-4. Crossover
Frequency”.
3
Select “Custom”.
(Main unit) (Remote control unit)
5
Enter the setting.
The Advanced Playback menu reappears.
(Main unit) (Remote control unit)
Setting Custom
*2ch DRCT/ST
q Select the setting. w Select the parameter.
(Main unit) (Remote control unit) (Main unit) (Remote control unit)
4
2 Setting the front B speakers when the surround mode is set to the 2-channel
Direct or Stereo
When “Adv+Front B” is selected at “7-2. Power Amp Assign” and “Custom” is selected at this
setting, the “Front B” setting is displayed.
•To play signals from the Front B speaker when in the 2-channel Direct or Stereo mode, set
“Used”.

Denon AVC-A1XVA Specifications

General

Brand	Denon
Model	AVC-A1XVA
Category	Amplifier
Language	English