Denon AVC-A1XVA User Manual

41
V
. Check of the measurement result
• The results of the measured items can be checked.
For instructions on checking the equalizer parameters, see pages 46 ~ 48.
1
Select the items.
The measurement results of each item can be
checked here.
Sp Config.Check
*Auto Setup
(Main unit) (Remote control unit)
2
Press the ENTER button and display the verification screen.
Press the ENTER button to switch to the second screen.
(Main unit) (Remote control unit)
[Delay Time Check]
NOTE:
• When measurements have been made using the measurement microphone, speakers
with a built-in filter such as subwoofers might be set with a value that differs from the
physical distance because of the internal electrical delay.
[Channel Level Check][Speaker Config. Check]
3
If the check ends, press the ENTER button again.
(Main unit) (Remote control unit)
4
Select whether or not to save the data you have
checked.
Select the following items based on the
measurement results.
Store : Set with the checked measurement value.
Cancel : If you do not want to set the contents
you have checked, cancel the auto setup
settings.
Store
*Auto Setup
(Main unit) (Remote control unit)
[Crossover Freq. Check]

Denon AVC-A1XVA Specifications

General

Brand	Denon
Model	AVC-A1XVA
Category	Amplifier
Language	English