66
Repeat step 5 to input the input source name.
6
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
(Main unit)
(Remote control unit)
To reset the input source name to the default value, press the cursor left or right button to
highlight the input source display, then press the cursor down button.
When “Yes” is selected for “Default”, then press the cursor left button to reset to the
default input source name.
Default : Yes
Rename TUNER
7
Once all the characters have been input, press the ENTER button.
The Function Rename screen reappears.
Use the same procedure to change other input source names as well.
When the input source is selected, the display is as shown below.
Example: When the name has been changed to “TU-1500”
(Main unit) (Remote control unit)
8
Enter the setting.
The Audio Input Setup menu reappears.
(Main unit) (Remote control unit)
To Next Page
Loading...
Need help?
General
