Digi XBee 3 ZigBee User Manual

Digi XBee® 3 Zigbee® RF Module
5
Example:use the time module 28
Example: AT commands using MicroPython 28
MicroPython networking and communication examples 29
Zigbee networks with MicroPython 29
Example: forming and joining a Zigbee network using MicroPython 30
Example: network Discovery using MicroPython 31
Examples: transmitting data 32
Receiving data 33
Example: communication between two XBee 3 Zigbee modules 34
Exit MicroPython mode 37
Other terminal programs 37
Tera Term for Windows 37
Use picocom in Linux 38
Micropython help () 39
Secure access
Secure Sessions 42
Configure the secure session password for a device 42
Start a secure session 42
End a secure session 43
Secured remote AT commands 43
Secure a node against unauthorized remote configuration 43
Remotely configure a node that has been secured 44
Send data to a secured remote node 45
End a session from a server 45
Secure Session API frames 46
Secure transmission failures 47
Data Frames - 0x10 and 0x11 frames 47
Remote AT Commands- 0x17 frames 47
File system
Overview of the file system 49
Directory structure 49
Paths 49
Limitations 49
XCTU interface 50
Get started with BLE
Enable BLE on the XBee 3 Zigbee RF Module 52
Enable BLEand configure the BLEpassword 52
Get the Digi XBeeMobile phone application 53
Connect with BLEand configure your XBee 3 device 54
BLE reference
BLE advertising behavior and services 56
Device Information Service 56
XBee API BLEService 56
API Request characteristic 56
API Response characteristic 57

Digi XBee 3 ZigBee Specifications

General

Brand	Digi
Model	XBee 3 ZigBee
Category	Control Unit
Language	English