Digi XBEE2 User Manual

Command reference tables Security commands
XBee/XBee-PRO ZigBee RF Modules User Guide 161
Security commands
AT
Command
Name and Description
Node
Type
1
Parameter
Range
Default
EE Encryption Enable. Set/Read the encryption enable setting. CRE 0 - Encryption
disabled
1 - Encryption
enabled
0
EO Encryption Options. Configure options for encryption. Unused option
bits should be set to 0. Options include:
0x01 - Send the security key unsecured over-the-air during joins
0x02 - Use trust center (coordinator only
CRE 0 - 0xFF
NK Network Encryption Key. Set the 128-bit AES network encryption key.
This command is write-only; NK cannot be read. If set to 0 (default), the
module will select a random network key.
C128-bit value0
KY Link Key. Set the 128-bit AES link key. This command is write only; KY
cannot be read. Setting KY to 0 will cause the coordinator to transmit
the network key in the clear to joining devices, and will cause joining
devices to acquire the network key in the clear when joining.
CRE 128-bit value 0
1. Node types that support the command: C = Coordinator, R = Router, E = End Device

Digi XBEE2 Specifications

General

Brand	Digi
Model	XBEE2
Category	Control Unit
Language	English