Agency certifications United States FCC
XBee/XBee-PRO ZigBee RF Modules User Guide 184
United States FCC
The XBee RF Module complies with Part 15 of the FCC rules and regulations. Compliance with the labeling
requirements, FCC notices and antenna usage guidelines is required.
To fulfill FCC Certification, the OEM must comply with the following regulations:
1 The system integrator must ensure that the text on the external label provided with this device is placed on
the outside of the final product.
2 XBee RF Module may only be used with antennas that have been tested and approved for use with this
module (refer to the antenna tables in this section).
OEM labeling requirements
The Original Equipment Manufacturer (OEM) must ensure that FCC labeling requirements are met. This includes a
clearly visible label on the outside of the final product enclosure that displays the contents shown in the figure
below.
Required FCC Label for OEM products containing the XBee RF Module
Required FCC Label for OEM products containing the XBee PRO (S2) RF Module
Required FCC Label for OEM products containing the XBee PRO (S2B) RF Module
FCC notices
IMPORTANT: The XBee and XBee PRO RF Module have been certified by the FCC for use with other products
without any further certification (as per FCC section 2.1091). Modifications not expressly approved by Digi could
void the user's authority to operate the equipment.
IMPORTANT: OEMs must test final product to comply with unintentional radiators (FCC section 15.107 & 15.109)
before declaring compliance of their final product to Part 15 of the FCC Rules.
IMPORTANT: The RF module has been certified for remote and base radio applications. If the module will be
used for portable applications, the device must undergo SAR testing.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
Contains FCC ID: OUR-XBEE2*
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this device may not cause harmful interference and (ii.) this
device must accept any interference received, including interference that may cause
undesired operation.
Contains FCC ID:MCQ-XBEEPRO2*
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this device may not cause harmful interference and (ii.) this
device must accept any interference received, including interference that may cause
undesired operation.
Contains FCC ID:MCQ-PROS2B*
The enclosed device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (i.) this device may not cause harmful interference and (ii.) this
device must accept any interference received, including interference that may cause
undesired operation.
To Next Page
Loading...
Need help?
General
