Digi XBEE2 User Manual

Overview Programmable XBee SDK
XBee/XBee-PRO ZigBee RF Modules User Guide 23
Programmable XBee SDK
The XBee Programmable module is equipped with a Freescale MC9S08QE32 application processor.
This application processor comes with a supplied bootloader. To interface your application code
running on this processor to the XBee Programmable module's supplied bootloader, use the
Programmable XBee SDK.
To use the SDK, you must also download CodeWarrior. The download links are:
 CodeWarrior IDE: http://ftp1.digi.com/support/sampleapplications/40003004_B.exe
 Programmable XBee SDK: http://ftp1.digi.com/support/sampleapplications/40003003_D.exe
If these revisions change, search for the part number on Digi’s website. For example, search for
“40003003”.
Install the IDE first, then install the SDK.
The documentation for the Programmable XBee SDK is built into the SDK, so the Getting Started
guide appears when you open CodeWarrior.

Digi XBEE2 Specifications

General

Brand	Digi
Model	XBEE2
Category	Control Unit
Language	English