Owner's Manual
26
Preset A/B Parts
Each preset has two parts, referred to as “A” and “B”. Vocal effects can be
independently enabled or disabled in each part. This feature can be helpful for
applying dynamic effects within a song without having to navigate presets, such
as enabling delays or distortion effects on certain words or vocal phrases. These
parts are toggled using the A/B footswitch. The A/B footswitch can be congured
for toggle, momentary, or auto operation. For information on conguring the A/B
footswitch, see "A/B Footswitch Conguration" on page 32.
To store A/B parts:
1. Select the desired preset using the <Up> and <Down> footswitches or the
<DATA> encoder.
2. Ensure part A is selected (indicated by the "A" LED above the A/B footswitch). If
it is not, press the <A/B> footswitch to select it.
3. Enable the Vocal effects you wish to use for part A by pressing their
corresponding buttons (e.g., <Modulation>, <Dist/Filt>, etc.).
4. Press the <A/B> footswitch to switch to part B (indicated by the "B" LED
above the A/B footswitch). Enable the Vocal effects you wish to use for part B
by pressing their corresponding buttons (e.g., <Modulation>, <Dist/Filt>,
etc.).
5. Now that both parts have been congured, store the preset by pressing the
<Store> button and following the store procedure. See "Presets" on page
24
for further information on storing presets.
To Next Page
Loading...
Need help?
General
