50
Saving Settings
You can save and retrieve nine sets of settings for mastermaking and printing. The settings are stored in memory even
when the power is turned OFF.
The following settings are saved:
• Number of prints (including sets) • Text/Photo
• Master size • Zoom ratio
• Mastermaking darkness • 94% reduction
• Printing speed
Saving Settings
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Confirm that the LCD panel displays the settings y
ou want to store.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press
(FUNCTION SWITCH) ke
y. Press
(SELECT) ke
y several times to show the screen
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press
(SELECT) ke
y several times, select
"SAVE", then press
(FUNCTION
SWITCH) ke
y.
Each time
(SELECT) key is pressed, the arrow on the
LCD panel moves as follows.
“RETRIEVE” → “SAVE” → “CLEAR” → “CANCEL”
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Use the ke
ypad to specify the number you want
to store. You can store numbers from 1 to 9.
Select "C" to cancel.
• The numbers already stored are displayed
flashing. Select a number that is not flashing.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
5.MEMORY MODE
SAVE
SAVE
123456789 C
5.MEMORY MODE
REFERENCE
REFERENCE
at right,then press FUNCTION SWITCH key
again.
To Next Page
Loading...
Need help?
General
