Duplo DP - M300 User Manual

69
4
1
Miscellaneous Functions
After mastermaking has finished, you can fine-tune the position of the image (in the horizontal direction) within ±10mm.
• You can adjust the printing position while the machine is printing.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press or “PRINTING POSITION AD-
JUSTMENT” k
eys to adjust the printing posi-
tion.
Pressing and holding or (PRINTING POSITION
ADJUSTMENT) keys continuously adjusts the printing
position.
The printing position indicator lamps change for each
approximately 3mm change in the printing position.
●To move the printing position to the left, press key.
The printing position indicator lamp moves to the left.
●To move the printing position to the right, press key.
The printing position indicator lamp moves to the right.
To return to the default settings, use one of the
following two methods:
• Press or key repeatedly until the
center printing position indicator lamp is lit.
• Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode (a page
24). Do not press (ALL CLEAR) key
while the machine is printing.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Printing Position Adjustment Function
Paper
Image
Direction of paper
movement
Paper
Image
Direction of paper
movement
“PRINTING POSITION
ADJUSTMENT key”
REFERENCE
REFERENCE

Duplo DP - M300 Specifications

General

Brand	Duplo
Model	DP - M300
Category	All in One Printer
Language	English