Duplo DP - M300 User Manual

56
Adjusting Master Darkness
The master darkness (the level at which black and white are differentiated) can be adjusted in 3 steps.
Make the master more “dark” if the document is light, or “light” if the document is dark.
•Set the “Master Darkness” before making the master.
•If you adjust the master darkness, you must repeat the mastermaking process before making
prints.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) ke
y. Press
(SELECT) ke
y several times to show the screen
at right.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) ke
y.
The master darkness screen appears.
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (SELECT) ke
y several times to display
the desired master darkness.
Each time (SELECT) key is pressed, the display of the
LCD panel changes as follows.
“LIGHT” →
“DARK”
→
“NORMAL”
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Press (FUNCTION SWITCH) ke
y.
There are two ways to return the darkness to
“NORMAL” as follows.
• Set the darkness to “NORMAL” in the same
procedure.
• Press (ALL CLEAR) key. In this case, all
settings are reset to standard mode
(a page 24).
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
1
NORMAL
DARK
DARK
The master darkness is selected, and press SELECT key
several times the standard screen appears.
IMPORTANT
REFERENCE
2.MASTER DARKNESS
2.MASTER DARKNESS
2.MASTER DARKNESS

Duplo DP - M300 Specifications

General

Brand	Duplo
Model	DP - M300
Category	All in One Printer
Language	English