PA Series Biofeedback and Stimulation System User Manual Software Operations
25
Chapter 5 *Software Operation
5.1 Starting up the Software
After the device is turned on, the software login interface pops up automatically.
The drop-down user name menu lists all the latest user names. Select a user name, input
the correct password and then click Login to open the main interface.
If it’s the first time to use the software, please use sys as the user name to log in, the
default password is sys. After entering the system, you can add patient.
NOTE: Suggest to revise the password of user name sys after first login.
5.2 Main Interface
After successfully logging in to the system, the system will automatically turn to the main
interface, where you can choose to enter the functional modules such as assessment,
treatment, postpartum rehab, database, setup, etc. See figure 5-1.
Figure 5-1
5.3 Patient Information
5.3.1 Patient Information Interface
Select Assessment, Treatment or General Rehab, the system will automatically turn to
Patient List interface, see figure 5-2.
To Next Page
Loading...
Need help?
General
