EFI Fiery Configuration And Setup

CONNECTING TO THE NETWORK 10
CONNECTING TO THE NETWORK
This chapter summarizes the stages in setting up the Fiery Controller.
Fiery Controller on the network
When the Fiery Controller is connected to a network, it behaves as a networked printer.
The Fiery Controller supports the following network protocols (rules that enable
computers on a network to communicate with each other):
•Bonjour
• TCP/IP, which also includes the BOOTP, DHCP, FTP, HTTP, IMAP, IPP, IPv4, IPv6,
LDAP, LPD, NBT, POP3, Port 9100, SMB, SMTP, SNMP, SNTP, and SSL/TLS
protocols
These protocols can run concurrently on the same cable. Computers that use other protocols
can print through a server that uses one of the supported protocols. The Fiery Controller is
auto-sensing, and handles all connections simultaneously.

EFI Fiery Specifications

General

Brand	EFI
Model	Fiery
Category	Server
Language	English