EFI Fiery Configuration And Setup

SETTING UP THE PRINTER 26
Subnet Mask
255.255.255.0
Set the subnet mask for printing with TCP/IP on your network.
Confirm the subnet mask setting with your network administrator before proceeding.
Gateway Type
Automatic, Manual
Choose the method for obtaining the gateway address for printing with TCP/IP.
Gateway Address
127.0.0.1
If you answered Manual to the previous option, set the gateway address for printing with
TCP/IP on your network.
Enable Web Services
On, Off
Select On to make the WebTools available to users. TCP/IP must be enabled on the Fiery
Controller and user workstations. A Java-enabled Web browser and a valid IP address or DNS
host name are required for each user computer.
Turn Off Firewall
Yes, No
If you set this option to Yes the following are disabled: MAC Filtering, IP Filtering, and Port
Configuration.
Login timeout
5 minutes, 10 minutes, 15 minutes, 30 minutes, never
Specify the amount of time the Fiery Controller times out after you log on.
When you are done making changes, press Save Changes. The Fiery Controller requires a
reboot in order for any Setup changes to take affect.
802.1x Setup options
The Fiery Controller can seek authentication from an 802.1x authentication server (such as a
RADIUS server), often through an intermediate access point (an authenticator). The Fiery
Controller seeks this authentication at startup, or when the Ethernet cable is disconnected and
reconnected. If the Fiery Controller is successfully authenticated, it is allowed access to the
network.
Press 802.1x Setup to access 802.1x Setup options.

EFI Fiery Specifications

General

Brand	EFI
Model	Fiery
Category	Server
Language	English