To Next Page

To Previous Page

SETTING UP THE PRINTER 29

Print Page tab

From the Print Pages tab, you can print the following system pages and activity logs:

Tools tab

Calibrate tab

PS Test Page: Allows you to confirm that the Fiery Controller is properly connected to the

printer, and provides color and grayscale samples to troubleshoot problems with the printer

or the Fiery Controller. Settings on the Test Page may include: Server Name, color settings,

printer model, and date and time the Test Page was printed.

Configuration: Prints the Configuration page, which gives the current server and device

configuration. This page lists general information about the hardware and software

configuration of the Fiery Controller, the current options for all Setup settings, information

about the current calibration, and the IP address of the Fiery Controller.

E-mail Log: Prints a log of recent e-mail activity that is useful to the network administrator.

To print the E-mail Log, you must first enable the appropriate service. For E-mail Services,

see Configure Help.

PS Font List: Prints a list of all fonts currently on the Fiery Controller hard disk.

Color Charts: Prints samples of the RGB, CMY, and PANTONE colors available from the

Fiery Controller.

Job Log: Prints a log of the last 55 jobs.

Tray Alignment: Adjust the placement of text and images on a page so that they are correctly

aligned on the sheet of paper and both sides of a duplex sheet have the exact same

alignment. For more information about this function, see Utilities.

Setup: Setup allows you to configure the Fiery Controller so that it can be operational on

your network. Use Setup to perform minimum network setup to put the Fiery Controller on

the network. Use Configure to specify any remaining Setup options. Configure can be

accessed from WebTools or from Command WorkStation.

Calibrate: Calibrate the Fiery Controller using ColorCal. For more information, see Color

Printing. If an Administrator password has been set, you must enter it to access Calibration.

EFI Fiery Configuration And Setup

Other manuals for EFI Fiery