SETUP OPTION REFERENCE 36
Job Log Setup options
• To access Job Log Setup options, choose Configure > Server > Job Log.
Rip While Receive
• To access Enable RIP While Receive, choose Configure > Server > Jobs > Enable RIP While
Receive.
Option Settings
(default is underlined)
Description
Enable auto export On, Off
Specify to automatically export the Job Log. If you set this option
to On, specify a date and time for the export to occur.
The Job Log is exported as a CVS-format text file.
Clear job log after exporting On, Off Select this option to automatically clear the Job Log after you
export it.
NOTE: Enable auto export must be set to On to use this option.
Export job log via: Email, SMB
NOTE: Enable auto export must be set to On to use this option.
If you select Email, enter the email address to send the Job Log.
If you select SMB, specify the SMB address, user name, and
password. Click Verify to make sure that the SMB information
is correct.
Require password to print job log On, Off
Select this option to require that users enter the Administrator
password before printing the Job Log.
Default page size Letter/A4, Tabloid/A3
Select the paper size for the printed Job Log.
Option Settings
(default is underlined)
Description
Enable RIP While Receive On
, Off When RIP While Receive is enabled, a print job begins processing
and spooling as soon as the Fiery Controller is Idle. Otherwise,
the print job will begin processing only after it has completed
spooling.
To Next Page
Loading...
Need help?
General
